close
Choose Your Site
Global
Social Media
PVC wall panel production line consists of high-speed PVC chemicals mixer, screw feeder, conical twin-screw plastic extruder, die head and calibration mold, vacuum shaping table, tractor, cutting machine, PVC decorative film hot stamping and laminating machine (or double colors printing machine), stacking machine, PVC crusher, PVC pulverizer, etc. PVC wall panel / PVC decorative panel is made of PVC resin as the main raw material. It has been denatured and added with various additives such as stabilizers and enhancers. The PVC panel is light in weight, easy to install, waterproof, and moth-proof. The surface pattern changes as well. There are many, and they are resistant to pollution, easy to clean, and have good sound and heat insulation properties. In particular, the new process adds flame retardant materials so that it can extinguish fire immediately, making it safer to use.
Features of PVC Wall Panel Production Line
- Fetching in Europe and America advanced technology and uniting with domestic condition, our company develop this production line.
- Easy and convenient for operation and maintain
- Economical price, suitable for large scale investment.
- This production line is used to manufacture PVC wall panel with width normally from 250mm to 600mm with different section shape and height.
- The surface of PVC ceiling / wall panel can be treated by hot stamping printing or lamination machine, which can make marble, wooden design on surface of PVC ceiling or PVC wall panel.
- Automatic screw type feeding system, raw materials do not bridge, feeding stability
- Adopts horizontal gearbox and distribution box, build in cooling oil, easy to install and maintain.
- Be equipped with ABB inverter, Siemens Motor and Schneider electrics, lower staring power, reduce voltage fluctuation and easy to adjust speed
- The preheating feeder is placed on the top of the extruder to extract most of the remaining moisture in the wood flour first, making the feeding section of the extruder more substantial; it has the characteristics of good plasticizing and mixing effect. The optimized screw design makes the shear smaller, making it difficult to cut wood fibers and allowing the material to stay evenly in the machine.
- Adopt conical twin screw extruder, The heat generated by friction is less, the material is sheared more evenly, the screw has a larger conveying capacity, the extrusion volume is relatively stable, the material stays in the barrel for a long time, and the mixture is even.
- Flange surface be nickel-coating treatment, ensure the stable extrusion
Parameters of PVC Wall Panel Extruder Machine
Model | SJ51 | SJ53 | SJ55 | SJ65 |
Diameter of screw | 51/105 | 53/128 | 55/120 | 65/132 |
Working speed (kg/h) | 120 | 150 | 180 | 250 |
Main motor power | 15 KW | 22 KW | 22 KW | 37 KW |
The formulas of the production for PVC wall panel:
| Item | Materails |
| 1 | PVC resin |
| 2 | Calcium carbonate |
| 3 | Stabilizer |
| 4 | Stearic acid |
| 6 | CPE/135A |
| 7 | Paraffin |
| 8 | ACR |
PVC wall panel production line consists of high-speed PVC chemicals mixer, screw feeder, conical twin-screw plastic extruder, die head and calibration mold, vacuum shaping table, tractor, cutting machine, PVC decorative film hot stamping and laminating machine (or double colors printing machine), stacking machine, PVC crusher, PVC pulverizer, etc. PVC wall panel / PVC decorative panel is made of PVC resin as the main raw material. It has been denatured and added with various additives such as stabilizers and enhancers. The PVC panel is light in weight, easy to install, waterproof, and moth-proof. The surface pattern changes as well. There are many, and they are resistant to pollution, easy to clean, and have good sound and heat insulation properties. In particular, the new process adds flame retardant materials so that it can extinguish fire immediately, making it safer to use.
Features of PVC Wall Panel Production Line
- Fetching in Europe and America advanced technology and uniting with domestic condition, our company develop this production line.
- Easy and convenient for operation and maintain
- Economical price, suitable for large scale investment.
- This production line is used to manufacture PVC wall panel with width normally from 250mm to 600mm with different section shape and height.
- The surface of PVC ceiling / wall panel can be treated by hot stamping printing or lamination machine, which can make marble, wooden design on surface of PVC ceiling or PVC wall panel.
- Automatic screw type feeding system, raw materials do not bridge, feeding stability
- Adopts horizontal gearbox and distribution box, build in cooling oil, easy to install and maintain.
- Be equipped with ABB inverter, Siemens Motor and Schneider electrics, lower staring power, reduce voltage fluctuation and easy to adjust speed
- The preheating feeder is placed on the top of the extruder to extract most of the remaining moisture in the wood flour first, making the feeding section of the extruder more substantial; it has the characteristics of good plasticizing and mixing effect. The optimized screw design makes the shear smaller, making it difficult to cut wood fibers and allowing the material to stay evenly in the machine.
- Adopt conical twin screw extruder, The heat generated by friction is less, the material is sheared more evenly, the screw has a larger conveying capacity, the extrusion volume is relatively stable, the material stays in the barrel for a long time, and the mixture is even.
- Flange surface be nickel-coating treatment, ensure the stable extrusion
Parameters of PVC Wall Panel Extruder Machine
Model | SJ51 | SJ53 | SJ55 | SJ65 |
Diameter of screw | 51/105 | 53/128 | 55/120 | 65/132 |
Working speed (kg/h) | 120 | 150 | 180 | 250 |
Main motor power | 15 KW | 22 KW | 22 KW | 37 KW |
The formulas of the production for PVC wall panel:
| Item | Materails |
| 1 | PVC resin |
| 2 | Calcium carbonate |
| 3 | Stabilizer |
| 4 | Stearic acid |
| 6 | CPE/135A |
| 7 | Paraffin |
| 8 | ACR |
